Hammer Unions

Jaitisteel And Engineering Co. supplies Sara Hammer Unions made from high-quality steel forgings, designed for various pressure ratings with options for API threaded or butt weld end connections. Suitable for sour and low-temperature services, all critical components meet NACE standards and come with full traceability. The unions are Weco interchangeable by size and figure number and feature three hammer lugs for secure, easy installation.

Types of Hammer Unions

Fig 50 Union 500 PSI CWP

Recommended for air, water, oil, or gas service to 500 PSI NSCWP. Standard subs are threaded for API line pipe.

Size (in.)	Length (in.)	Nut Radius (in.)	Weight (Kg.)
5″	5^1/2″	5^1/4″	10.80

Fig 100 Union 1,000 PSI CWP

Recommended for air, water, oil, or gas service to 1,000 PSI NSCWP. Standard subs are threaded for API line pipe and are Weco interchangeable. Also available with butt weld ends.

Size (in.)	Length (in.)	Nut Radius (in.)	Weight (Kg.)
2″	3^5/8″	2^29/32″	2.60
2^1/2″	4^9/32″	3^5/8″	5.20
3″	5^1/8″	4″	6.20
4″	5^3/4″	4^11/16″	10.20
5″	6^33/64″	5^9/16″	13.80
6″	6^7/8″	6^7/8″	23.20
8″	7^5/16″	7^13/16″	32.20

Fig 200 Union 2,000 PSI CWP

Recommended for air, water, oil, or gas service to 2000 PSI NSCWP. A unions of great utility meeting most requirements in the medium pressure ranges. Precision seating surfaces assure dependable pressure seal. Standard subs are threaded for API line pipe and are Weco interchangeable. Sizes of 2″ and above also available with butt weld end connections.

Size (in.)	Length (in.)	Nut Radius (in.)	Weight (Kg.)
1^a”	2^19/32″	2″	1.00
1^1/4″	2^25/32″	2^5/32″	1.60
1^1/2″	2^29/32″	2^13/32″	1.60
2″	3^1/4″	2^29/32″	2.40
2^1/2″	4^1/4″	3^5/8″	4.50
3″	4^17/32″	4^1/4″	6.60
4″	4^15/16″	5″	9.60
5″	7^3/64″	52^3/32″	19.00
6″	6^25/32″	6^1/2″	22.00
8″	7^5/16″	7^13/16″	29.10
10″	9^3/32″	9^1/16″	41.36

Fig 206 Union 2,000 PSI CWP

Recommended for air, water, oil or gas service to 2,000 PSI NSCWP. A Buna-N ‘O’ ring is mounted on the plain sub to provide an additional seal. Subs and nuts of the Fig. 206 unions are interchangeable with the Fig. 200 unions. Standard subs are threaded for API line pipe. Sizes of 2″ and above also available with butt weld ends. connections.

Size (in.)	Length (in.)	Nut Radius (in.)	Weight (Kg.)
1″	2^19/32″	2″	1.00
1^1/4″	2^25/32″	2^5/32″	1.07
1^1/2″	2^29/32″	2^13/32″	1.07
2″	3^1/4″	2^29/32″	2.40
2^1/2″	4^1/4″	3^5/8″	5.02
3″	4^17/32″	4^1/4″	6.60
4″	4^15/16″	5″	9.10
6″	6^25/32″	6^1/2″	19.30
8″	7^5/16″	7^13/16″	29.10
10″	9^3/32″	9^1/16″	41.36

Fig 207 Union 2,000 PSI CWP

Recommended for air, water, oil, or gas service to 2,000 PSI NSCWP. A blanking cap with Buna-N ‘O’ ring seal provides an efficient and dependable closure. The threaded sub is interchangeable with Fig. 200 threaded sub. Also available with butt weld ends.

Size (in.)	Length (in.)	Nut Radius (in.)	Weight (Kg.)
3″	3^3/4″	2^3/4″	4.45
4″	4^45/64″	3^17/32″	7.38
6″	5^37/64″	4^27/32″	17.10

Fig 211 Union 2,000 PSI CWP

Recommended for production systems with electrolytic corrosion problems Laminated insulating rings provide 35 million Ohms resistance across the unions. O-ring in male sub provides a positive primary seal. Seal ring in female sub delivers a positive secondary seal

Size (in.)	Length (in.)	Nut Radius (in.)	Weight (Kg.)
2″	3^29/64″	3^1/16″	3.00
3″	4^35/64″	4^17/64″	6.40

Fig 400 Union 4,000 PSI CWP

Recommended for air, water, oil, or gas service to 4,000 PSI NSCWP. Utilizes precision ball and cone seating surfaces for easy alignment and dependable pressure seal. Sizes over 4″ are rated to 2,500 PSI NSCWP. Also available with a lip-type seal in 2″ size only as Fig 402.

Fig 600 Union 6,000 PSI CWP

Recommended for air, oil, gas or steam service to 6,000 PSI NSCWP. Rugged and fast 2 pitch acme thread makes this the quickest unions to makeup or break out (only two turns). The threaded sub is fitted with a bronze seat insert for added effectiveness in pressure sealing.

Size (in.)	Length (in.)		Nut Radius (in.)	Weight (Kg.)
Size (in.)	Total	CTR. BR.	Nut Radius (in.)	Weight (Kg.)
2″	5^1/4″	1/4″	3^9/16″	5.80
3″	6″	3/8″	4^1/4″	9.40
4″	8^7/32″	3/8″	5″	14.40
6″	11^1/32″	3/8″	6^5/8″	28.80
8″	11^13/32″	3/8″	7^5/8″	42.70
10″	10^37/64″	–	9^49/64″	56.80
12″	10^7/8″	3/8″	10^1/4″	74.43

Size (in.)	Length (in.)		Nut Radius (in.)	Weight (Kg.)
Size (in.)	Total	CTR. BR.	Nut Radius (in.)	Weight (Kg.)
1″	3^9/16″	1/4″	2^25/32″	1.59
1^1/2″	4^7/8″	1/4″	3^7/32″	4.30
2″	6^7/16″	1/4″	3^3/4″	6.80
2^1/2″	7^9/16″	3/8″	4^1/4″	9.10
3″	8^11/16″	3/8″	4^1/2″	13.18
4″	10^1/16″	3/8″	5^1/4″	18.63

Fig 602 Union 6,000 PSI CWP

Recommended for air, water, oil, gas or mud service to 6,000 PSI NSCWP. This unions has a replaceable lip-type seal ring of Buna-N specifically designed to minimize fluid flow turbulence. Lip-type ring provides a pressure seal and protection for metal-tometal seating surfaces. Smaller and lighter than Fig. 600 unions and are recommended for manifold and truck mounting where size and weight are critical.

Fig 1002 Union 10,000 PSI CWP

Recommended for air, water, oil, gas and mud service to 10,000 PSI NSCWP. This unions has a replaceable lip-type seal ring of Buna-N specifically designed to minimize fluid flow turbulence. The lip-type ring works similarly as in the Fig. 602 unions. These unions are for use on high pressure systems and trucks.

Size (in.)	Length (in.)		Nut Radius (in.)	Weight (Kg.)	Length Butt. Weld Sch. 80
Size (in.)	Total	CTR. BR.	Nut Radius (in.)	Weight (Kg.)	Length Butt. Weld Sch. 80
1″	3^17/32″	1/4″	2^5/32″	1.59	3^17/32″
1^1/4″	4^29/32″	1/4″	3^7/32″	4.54	4^11/16″
1^1/2″	4^29/32″	1/4″	3^7/32″	4.10	4^11/16″
2″	5^1/4″	1/4″	3^3/4″	5.90	5^1/32″
3″	6^1/4″	3/8″	4^1/2″	10.45	5^7/16″
4″	8^1/4″	3/8″	5^7/32″	15.00	6^1/16″

Size (in.)	Length (in.)		Nut Radius (in.)	Weight (Kg.)	Length Butt. Weld Sch. 80 XX HVY
Size (in.)	Total	CTR. BR.	Nut Radius (in.)	Weight (Kg.)	Length Butt. Weld Sch. 80 XX HVY
1″	3^17/32″	1/4″	2^5/32″	1.59	3^17/32″	–
1^1/4″	4^7/8″	1/4″	3^7/32″	4.54	–	–
1^1/2″	4^7/8″	1/4″	3^7/32″	4.10	4^11/16″	–
2″	5^1/4″	1/4″	3^3/4″	6.00	5^1/32″	–
2^1/2″	6^1/8″	3/8″	4^1/4″	7.95	5^1/8″	–
2^1/2″EUE	5^15/16″	3/8″	4^1/4″	7.95	–	–
3″	6^1/4″	3/8″	4^1/2″	10.00	5^3/8″	5^3/8″
4″	8^1/4″	3/8″	5^7/32″	17.95	5^11/16″	–
5″	–	–	6^1/4″	25.90	5^15/16″	6^1/8″

Fig 1003 Union 10,000 PSI CWP

Recommended for high pressure manifolding and drilling rig use where alignment of piping components is a problem. Recommended for air, water, oil, gas or mud service to 10,000 PSI NSCWP. This unions has a ball seat that allows a total of 15 (±7½ ) angular adjustment. An ‘O’ ring seal in addition to the metal-to-metal seat assures a pressure tight connection.

Fig 1502 Union 15,000 PSI CWP

Recommended for air, water, oil, gas and mud service to 15,000 PSI NSCWP. This unions has a replaceable lip-type seal ring of Buna-N specifically designed to minimize fluid flow turbulence. The lip-type ring also provides a pressure seal and protection for metal to metal seating surface and are recommended for manifold and truck mounting or other installations where high pressure is encountered.

Size (in.)	Length (in.)		Nut Radius (in.)	Weight (Kg.)
Size (in.)	Total	CTR. BR.	Nut Radius (in.)	Weight (Kg.)
2”	4^3/4″	–	3^1/2″	05.64
3″ LP THD	9^1/8″	3/8″	4^7/8″	20.45
3″ SCH 160	8^7/8″	–	4^7/8″	21.60
3″ XX HVY	9^1/8″	–	4^7/8″	22.00
4″ LP THD	10^15/16″	1/2″	6″	32.95
4″ SCH 160	10^11/16″	–	6″	34.54
4″ XX HVY	10^15/16″	–	6″	35.45
5″ SCH 160	10^9/16″	–	6″	33.63
5″ XX HVY	10^15/16″	–	6″	34.77

Size (in.)	Length (in.)		Nut Radius (in.)	Weight (Kg.)	Length Butt. Weld XX HVY
Size (in.)	Total	CTR. BR.	Nut Radius (in.)	Weight (Kg.)	Length Butt. Weld XX HVY
1″	4^3/8″	1/4″	2^3/4″	3.82	–
2″	7″	1/4″	4″	9.54	6^1/4″
3″	7^5/8″	3/8″	4^13/16″	14.10	5^1/4″
4″	8^1/2″	1/2″	6^1/16″	34.00	–
5″	9^7/64″	–	6^45/64″	44.40	–

Fig 2202 Union 2,000 PSI CWP

Recommended for standard service to 20,000 PSI NSCWP. Available in butt weld end connections only. Available as Fig 2202 for sour service (15,000 PSI WP).

Fig YH 110 Union 500-6,000 PSI CWP

Recommended for use in flow lines to isolate for cathodic protection. The sealing action is provided by ‘O’ Rings fitted into a machined groove between the two metal mating parts. The metal parts are separated by nonconductor gaskets that avoid penetration to flow. seepage and resistant to acids, chemicals and temperatures encountered in normal service. Maximum temperature is 250º F.

Size (in.)	Length (in.)	Nut Radius (in.)	Weight (Kg.)
2″	7^3/8″	3^23/32″	10.45
3″	8^5/8″	6^5/32″	21.80
4″	8^1/2″	6″	34.50

Size (in.)	CWP	TP	Color
Size (in.)	CWP	TP	Subs	Nut
2″ – 3″	500	750	Maroon	Maroon
1″ – 4″	1,000	1,500	Maroon	White
1/4″ – 4″	2,500	3,750	Orange	Orange
1″ – 3″	4,000	6,000	Brown	Brown
1/4″- 1/2″	6,000	9,000	Blue	Blue

Fig YH 210 Blanking Union

Designed for use on manifolds, jumper assemblies and other installations where a blank cap connection is required. This Unioncanbe interchanged with subs of fig YH-300, if required. The cap is furnished blank as standard, but can be drilled and tapped for a ^1/8″-1″ NPT for a bleeder plug.

Fig YH 300 Union 1,000-6,000 PSI CWP

It is a flat face Union with ‘O’- Ring fitted into the groove of the female sub. The ‘O’-Ring is completely enclosed with the flat face of mating part and becomes more effective as additional pressure is applied.

Size (in.)	CWP	TP	Color
Size (in.)	CWP	TP	Subs	Nut
2″ – 3″	500	750	Maroon	Maroon
1″ – 4″	1,000	1,500	Maroon	White
1/4″ – 4″	2,500	3,750	Orange	Orange
1″ – 3″	4,000	6,000	Brown	Brown
1/4″ – 1/2″	6,000	9,000	Blue	Blue

Size (in.)	CWP	TP	Color
Size (in.)	CWP	TP	Subs	Nut
2″ – 8″	500	750	Yellow	Black
1″ – 7″	1,000	1,500	Yellow	Gray
1/4″ – 6″	2,500	3,750	Pearl Gray	Green
1/4″ – 6″	4,000	6000	Pearl Gray	Red
1″ – 4″	6,000	9000	Pearl Gray	Blue
1″ – 2″	10,000	15000	Pearl Gray	Orange
1/4″ – 1″	12,500	18750	Silver	Silver