Manufacturer, Supplier, Exporter & Stockiest of MONEL 400 Lap Joint Flange.

ASTM B564 MONEL 400 FLANGES | ASME SB564 MONEL 400 FLANGES | ALLOY 400 LAP JOINT FLANGES | UNS NO4400 LAP JOINT FLANGES

MONEL 400 LAP JOINT FLANGES

MONEL 400 LAP JOINT FLANGES | ASTM B564 MONEL 400 FLANGES | ASME SB564 MONEL 400 FLANGES | UNS NO4400 LAP JOINT FLANGES | ALLOY 400 LAP JOINT FORGED FLANGES

Jaiti Steel is a reputable manufacturer, exporter, and stockiest of a wide range of steel pipes and tubes. With a strong commitment to quality and customer satisfaction, we have established ourselves as a trusted name in the steel industry. Our company is dedicated to providing reliable and durable steel solutions to meet the diverse needs of our clients. 

We prioritize quality at every stage of our manufacturing process. Jaiti Steel adheres to stringent quality control measures to ensure that all our products meet international standards and specifications. Our team of skilled professionals monitors each production phase, from sourcing raw materials to the final inspection, to guarantee the highest level of quality.

MONEL 400 Lap Joint Flange Specification.

Monel 400 Lap Joint Flanges is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.

Monel 400 has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000° F, and its melting point is 2370-2460° F. However, Alloy 400 is low in strength in the annealed condition so, a variety of tempers may be used to increase the strength.

Lap Joint Flanges have all the same common dimensions as any other flange named on this page however it does not have a raised face, they used in conjunction with a “Lap Joint Stub End”.

These flanges are nearly identical to a Slip On flange with the exception of a radius at the intersection of the flange face and the bore to accommodate the flanged portion of the Stub End.

Their pressure-holding ability is little, if any, better than that of Slip On flanges and the fatigue life for the assembly is only one tenth that of Welding Neck flanges.

They may be used at all pressures and are available in a full size range. These flanges slip over the pipe, and are not welded or otherwise fastened to it. Bolting pressure is transmitted to the gasket by the pressure of the flange against the back of the pipe lap (Stub End).

 

Mechanical properties:

PropertiesMetricImperial
Tensile strength(annealed)517-620 MPa75-90 ksi
Yield strength172-345 MPa25-50 ksi
Modulus of elasticity179 GPa26000 ksi
Poisson’s ratio0.320.32
StandardMonel 400
UNSN04400
WERKSTOFF NR.2.4360
AFNORNU-30M
JISNW 4400
GOSTМНЖМц 28-2,5-1,5
BSNA 13
ENNiCu30Fe

MACHINING DATA
Carbide tools are suggested
for rates better than 50% of Type 304.
Machining TypeSuggested starting rates are:
Single Point turning :Roughing – 0.15″ depth, 0.015″/rev feed -175 SFM
Finishing – 0.025″ depth, 0.007″/rev feed – 200 SFM
Drilling :1/4″ Dia hole – 0.004″/rev feed – 60 SFM
1/2″ Dia hole – 0.007″/rev feed – 60 SFM
3/4″ Dia hole – 0.010″/rev feed – 60 SFM
Reaming :Feed – same as drilling – 100 SFM
Side and Slot Milling :Roughing – 0.25″ depth – 0.007″/tooth feed – 125SFM
Finishing – 0.050″ depth – 0.009″/tooth feed – 140SFM
These rates are for carbide tools,
Type C-2 for roughing, drilling and reaming.
Type C-3 for finishing.

Chemical Composition(%, max)

ElementContent (%)
Nickel, NiRemainder
Copper, Cu28-34
Iron, Fe2.5 max
Manganese, Mn2 max
Silicon, Si0.5 max
Carbon, C0.3 max
Sulphur, S0.024

ASTM B564 UNS NO4000 Forged Lap Joint Flanges Range

 

ASTM B564 Flanges SpecificationASTM B564 / ASME SB564
ASTM B564 Pipe GradesASME SB564 / ASTM B564 Grades Monel, Inconel, Incoloy, Hasteloy Alloy 600, Alloy 601, Alloy 625, Alloy 800, Alloy 800HT, Alloy 825, Alloy C22, Alloy C-276,Alloy 20
ASTM B564 Flanges TypeForged and Rolled Flanges
ASTM B564 Flanges Outer Diameter Size1/2″ NB To 48″ NB (Nominal Bore Size)
ASTM B564 Flange Pressure ClassClass: 150#, 300#, 600#, 900#, 1500#, 2500#, PN6 TO PN100
ASTM B564 TypesWeld Neck Flanges – WNRF, Socket Weld Flanges – SWRF, Slip On Raise Face Flange – SORF, Lap Joint Raise Face Flange – BLRF, Lap Joint Flange, Screwed (Threaded) Flange, Long Weld Neck Flange, Reducing Flange, Spectacle Lap Joint Flange, Ring Joint Flange, Large Die Ring Flange, Orifice Flange, Girth Flange etc.
ASTM B564 Flanges Delivery ConditionsAs Rolled, Normalizing Rolled, Thermomechanical Rolled / Formed, Normalizing Formed, Normalized and Tempered / Quenched and Tempered – BR / N / Q /T, Machined
ASTM B564 Flanges Dimension StandardStandard – ANSI – ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, and ANSI B16.48
ASTM B564 Flanges Other TestingNACE MR0175, NACE TM0177, NACE TM0284, CHARPY V-NOTCH TEST, RADIOGRAPHIC EXAMINATION, XRAY, ULTRASONIC EXAMINATION, LIQUID PENETRANT, MAGNETIC PARTICLE, HIC TEST, SSC TEST, SWC, H2 SERVICE, IBR, PWHT etc.
ASTM B564 Flanges Value Added ServicesDraw / Expansion / Machining / Sand Blasting / Shot Blasting / Galavanizing / Heat Treatment
ASTM B564 Flanges PackagingLoose / Bundle / Wooden Pallet / Wooden Box / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector
ASTM B564 Flanges Shipment & TransportationBy Road – Truck / Train, By Sea – Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air – Freighter Civil Passenger and Cargo Planes
ASTM B564 Flanges Material Test CertificateManufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC

We Export Our Pipes & Tubes Worldwide

We exportMonel 400 Lap Joint Flanges to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States Of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, europe, Africa, Asia, North America, South America, Middle East, Far East.etc