Manufacturer, Supplier, Exporter & Stockiest of ASTM A516 Grade 60 / 70 Steel Plates.
ASTM A516 Grade 60 Plate, ASTM A516 Grade 70 Plate, ASME SA516 Gr.70 Plate, A516 Gr. 70 NACE MR 1075 Steel Plates, A516 Grade 70 Plate Suppliers in India. Available ASTM A516 Grade 70 Circle, ASTM A516 Grade 70 Ring, ASTM A516 Grade 70 Blanks at Best Price with Impact Tested, Normalised Heat Treatment, HIC Tested, NACE Compliance.
Jaiti Steel is a reputable manufacturer, exporter, and stockiest of a wide range of steel pipes and tubes. With a strong commitment to quality and customer satisfaction, we have established ourselves as a trusted name in the steel industry. Our company is dedicated to providing reliable and durable steel solutions to meet the diverse needs of our clients.
We prioritize quality at every stage of our manufacturing process. Jaiti Steel adheres to stringent quality control measures to ensure that all our products meet international standards and specifications. Our team of skilled professionals monitors each production phase, from sourcing raw materials to the final inspection, to guarantee the highest level of quality.
ASTM A516 Grade 70 or ASME SA 516 grade 60 is one of the most popular steel grades.
ASTM A516 Grade 60/70 Boiler Quality Plates and ASTM A516 Grade 60/70 Pressure Vessel Steel plates are primarily intended for use in welded pressure vessels where notch toughness is important. These grades cover a range of tensile strengths from 55 – 90 MPa and this versatility explains much of the specifications popularity.
ASTM A 516 Grade 60/70 Plate Standard Specification Pressure Vessel Plates, Carbon Steel, is used for Moderate and Lower-Temperature Service
For plates thinner than 40mm normally supply as rolled. Plates above 40mm thick are normalised. For A516 grade 70, which is one of most popular steels, the ASME standard composition is as follows (dependent on grade)
ASTM A516 specification steel is used throughout the oil and gas, chemical and power generation industry and can be tested to exceed your specified requirements. HIC Testing is one such requirement as this material is used commonly in sour service/ wet h2s corrosive environments and so knowing how susceptible the material will be to hydrogen sulphide corrosion is imperative
ASTM A516 Standard steel plates are intended for use in pressure vessels where increased strength is is important.
We can supply:
Thickness from 3mm to 150mm
Width: from 1,500mm to 2,500mm
Length: from 6,000mm to 12,000mm
Technical conditions
1) Ultrasonic tested as per SA 578 or any other as per requirement
2) MTC acc to EN 10204 / 3.2
3) Charpy Impact tested at -20°C / -29°C / – 46°C.
4) Heat Treatment : Rolled / Normalised / N+T QT 5) BQ Plates with IBR form IV
6) Production: Hot Rolled
Chemical Composition(%, max)
| Element | Composition % | ||||
| Grade 55 [Grade 380] | Grade 60 [Grade 415] | Grade 65 [Grade 450] | Grade 70 [Grade 485] | ||
| Carbon, max a,b : | |||||
| 1⁄2 in. [12.5 mm] and under | 0.18 | 0.21 | 0.24 | 0.27 | |
| Over 1⁄2 in. to 2 in. [12.5 to 50 mm], incl | 0.20 | 0.23 | 0.26 | 0.28 | |
| Over 2 in. to 4 in. [50 to 100 mm], incl | 0.22 | 0.28 | 0.25 | 0.30 | |
| Over 4 to 8 in. [100 to 200 mm], incl | 0.24 | 0.27 | 0.29 | 0.31 | |
| Over 8 in. [200 mm] | 0.26 | 0.27 | 0.29 | 0.31 | |
| Manganese, b : | |||||
| 1⁄2 in. [12.5 mm] and under | |||||
| Heat analysis | 0.60–0.90 | 0.60–0.90 c | 0.85–1.20 | 0.85–1.20 | |
| Product analysis | 0.55–0.98 | 0.55–0.98 c | 0.79–1.30 | 0.79–1.30 | |
| Over 1⁄2 in. [12.5 mm]: | |||||
| Heat analysis | 0.60–1.20 | 0.85–1.20 | 0.85–1.20 | 0.85–1.20 | |
| Product analysis | 0.55–1.30 | 0.79–1.30 | 0.79–1.30 | 0.79–1.30 | |
| Phosphorus, max a | 0.25 | 0.25 | 0.25 | 0.25 | |
| Sulphur, max a | 0.25 | 0.25 | 0.25 | 0.25 | |
| Silicon | |||||
| Heat analysis | 0.15–0.40 | 0.15–0.40 | 0.15–0.40 | 0.15–0.40 | |
| Product analysis | 0.13–0.45 | 0.13–0.45 | 0.13–0.45 | 0.13–0.45 | |
ASTM A516 Grade 60 / ASTM A516 Grade 70 - Tensile Requirements
| ASTM A516 | Grade 55 [380] | Grade 60 [415] | Grade 65 [450] | Grade 70 [485] |
| Tensile strength, ksi [MPa] | 55–75 [380–515] | 60–80 [415–550] | 65–85 [450–585] | 70–90 [485–620] |
| Yield strength, min,a ksi [MPa] | 30 [205] | 32 [220] | 35 [240] | 38 [260] |
| Elongation in 8 in. [200 mm], min, % b | 23 | 21 | 19 | 17 |
| Elongation in 8 in. [50 mm], min, % b | 27 | 25 | 23 | 21 |
| a Determined by either the 0.2 % offset method or the 0.5 % extension-under-load method. b See Specification A20/A20M for elongation adjustment. | ||||
Equivalent Specifications and Standards of ASTM A516 Grade 60 / ASTM A516 Grade 70
| Standard | ASTM A516 Grade 60 | ASTM A516 Grade 70 |
| ASME | ASME SA516 Grade 60 | ASME SA516 Grade 70 |
| DIN Standard | DIN 17155 HII | – |
| British Standard | BS1501-161-430A | BS1501-224-490A/B |
| European Norm | EN10028 P265GH | EN10028 P355GH |
We Export Our Pipes & Tubes Worldwide
We export ASTM A516 Grade 60 / 70 Plates to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Myanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States Of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East etc.